Description
PLEASE USE THIS AS A GUIDE ONLY!
HAIRWORKS DOES NOT ACCEPT RESPONSIBILTY FOR ANY RESULTS AND/OR DAMAGE OCCURING FROM PURCHASE AND USE OF THESE PRODUCTS.
-ALWAYS READ MANUFACTURERS INSTRUCTIONS.
-ALWAYS DO A SKIN TEST EVERY TIME BEFORE YOU COLOUR YOUR HAIR!
Reflect Key:
The second number indicates the primary colour reflect and the third number indicated the secondary colour reflect of the shade.
.00 Intense
.0 Nautural
.1 Ash
.2 Violet
.3 Golden
.23 Beige
.4 Copper
.5 Mahogany
.6 Red
.7 Fashion Reds
.8 Pearl
For Example 7.12
7= Blonde 1= Ash 2= Violet
Permanent Creme Colour:
Mix well to obtain a smooth consistency in a non-metallic bowl, apply to dry hair.
Mixing Ratio - 1:1.5
Processing time - 30-45 minutes
Semi/Demi Colouring:
Mix well to obtain a smooth consistency in a non-metallic bowl, apply to shampooed, towel dried hair.
Mixing Ratio - 1:2
Processing time - 20-30 minutes
Ice & Violet Blonde:
Can be used as a permanent tint or for toning to eliminate unwanted yellow/brassy tones.
Tint mixing ratio - 1:1.5 Lifts up to 4 levels
Processing time - 30-45 minutes
Toning mixing ratio - 1:2
Processing time - Visual up to 30 minutes
Classic Blonde:
Can be used as a permanent tint or toning to eliminate unwanted yellow/brassy tones.
Tint mixing ratio - 1:2 Lifts up to 4 levels
Processing time - 45-60 minutes
Toning mixing ratio - 1:2
Processing time - Visual upto 30 minutes
Artic Blonde:
Tint mixing ratio - 1:2 Lifts up to 4 levels
Processing time - 45-60 minutes
Toners:
Eliminate unwanted yellow/brassy tones.
Mixing ratio - 1:2
Processing time - Visual up to 30 minutes
Intensifiers:
Designed to enhance reflect or intensity tone to your colour selection. No extra peroxide required, do not exceed 30ml per 100ml of tint.
Corrector:
Designed with counter-acting properties, enhancing reflect or intensifying tone. No extra peroxide is required, do not exceed 30ml per 100ml of tint.
Meches - Lift & Deposit:
A lift and deposit system, creating vibrant reflects in one application. Recommended on level 2-6 natural bases with little colour build up.
Mix well to obtain a smooth consistency in a non-metallic bowl, apply to dry hair.
Mixing Ratio - 1:1.5
Processing time - 15 minutes with heat or 30 minutes without heat.
Neutral 000:
Can be mixed with the Classic & arctic Blonde Series or any True Colour shade in equal parts to increase lift capability by one level.
Tint mixing ratio - 1:1.5
Classic & Artic Blonde mixing ratio - 1:2
